Online three phase UPS power(160KVA)

1.3 phase in and 3 phase out UPS power, 2.160KVA, 3.High frequency, 4.With external battery bank, 5.EPO and Bypass.

KEY FEATURES:

Online double conversion VFI provide pure sine wareIGBT inverter and output isolation transformer improve the system efficiency and reliability for kinds of load: transformer, emergency light, electric facility, industry processes, etc.Parallel redundant, parallel up to 8 modulesDetect all the information and status showing on LCD.Intelligent RS232 Communication PortSet output voltage from 220~240V.Over voltage, low voltage, over current, over load, etc can be detected and supply reliable protection. (EN/IEC60240)Advanced battery managementUPS monitoring software

 Technical Parameters:

Model		HP16000
Capacity		160KVA
Output power factor		100~70%
Efficiency(normal operating), load 100%		93~95%
Efficiency(economic model ), load 100%		98%
Maximum leakage(mA)		100
Mean time between failures(MTBF)		200,000 hours
Remote signaling		3 dry contact (battery low, battery discharge, bypass/failure);output 12Vdc 80mA
Remote control		EPO, bypass
Communication		RS232/C
Operating temperature		0±40°C
Max relative humidity		95%(non condensation)
Cool down		Mandatory wind( RPM change according to load )
Altitude		1KM output normal power( with increase of 100m, reduce 1%) Max 4KM
Noise		60~65 dB
Protecting Standard(EN 60529)		IP20
Incoming/outgoing cables		Downward/back
Standard		Standard:GB4943; Battery combinations:GB7260.2, GB/T 17626.2~5
Dimensions(W*D*H)mm		1400*940*1800
Weight(without battery)KG		1220
Rectifier input(standard UPS)
Rated voltage		380V,3 phases
Voltage range		±20%
Rated frequency		50/60Hz auto sensing
Frequency range		45~65
Maximum input current[A]		280
Power factor		80%
Soft start		0-100%,10 seconds
Battery
Charge current setting		0.5A*C10
Units(Rated voltage )		240(480VDC)
Charge current setting		0.2A*C10
Inverter output
Rated voltage[v]		380(3 phase+N)
Rated current[A]		235
phase voltage		220~380V(control pannel)
Waveform		Sine wave
(Ipeak/Lrms)
Linear load wave distortion		<2%
Nonlinear load wave distortion		<5%
Voltage stability		±1%
Transient voltage stability		±5%(in 10ms)
Rated frequency		Same as input frequency
Overload		600'/10'/1', (110/125/150% at nominal current.)
Inverter efficiency		96%
Bypass
Rated Voltage		380 (3 phase +N)
Input voltage range		±15% (Settled to ±10% or ±25% via control panel available)
Rated  frequency		50Hz/60Hz
Frequency range		±2% (Settled to ±5% via control panel available)
Inverter/bypass transfer time		<1ms
Overload capacity		10'/1'/18"(150/175/200% at nominal current.)

Online three phase UPS power(160KVA)